Flambeaux Gas and Electric Lanterns FAQ
1. What types of copper finishes are available?
Our standard finish that we recommend for all of our fixtures is the antique copper finish (hand rubber copper oxide). The precise oxidation creates a hue similar to an old copper penny. This even oxidation makes for a graceful aging process.
2. How do I know that my Flambeaux gas or electric lantern will be approved in my area?
All Flambeaux fixtures are U.L. approved. This certification satisfies almost all local codes. For more information about codes, contact a local installation professional.
3. How do I clean/care for my Flambeaux gas or electric lantern?
Virtually no maintenance is necessary, as our fixtures are handcrafted to last a lifetime. On occasion, the glass may be cleaned after the panes are carefully removed.
4. Why won’t my gas fixture stay lit?
A. Make certain that the glass panes are flush against the frame.
B. In high wind conditions, place copper pennies over 2 of the holes in the base of the fixture to reduce wind. If this does not work, a wind chimney may be purchased
C. Lastly, the gas line may need to be checked by a plumber.
5. What makes hand-riveted fixtures outlast those that are soldered?
Fixtures with soldered joints will eventually separate from the heat of the flame. Hand-riveted fixtures are extremely durable and will not fall apart even after the fixture has been heated.
6. How many inches must a fixture hang from a ceiling on a porch?
The National Fuel Gas Code ANSI Z2231.1 (NFPA54) requires that there must be at least 12” clearance above a hanging gas light. However, as always, local code prevails.
7. What is the required code from the flame to the combustible wall?
The National Fuel Gas Code ANSI Z2231.1 (NFPA54) requires that there must be at least 6” clearance from the flame to the wall. However, as always, local code prevails.
8. How high should my flame be?
For optimum beauty and economy, Flambeaux lights are designed for a flame to not exceed two inches in height.
9. How many BTUs does each fixture use?
Each fixture uses 1281 BTUs.
10. May I use propane for my gas fixture?
Yes, Flambeaux gas lanterns offer a burner assembly specifically designed to accommodate propane.
11. What is the standard size for the post mount attachment?
The standard post size is 3”. Flambeaux gas and electric lanterns can customize and attachment to accommodate any size post.
12. What is the size of the standard back plate?
The standard back plate is 5” x 5”. However, Flambeaux gas and electric lanterns can make custom back plates to accommodate the customer and the application.
13. Where is the stub out location?
The stub out location will depend on the door and ceiling heights of the application call us at 1-866-90-LIGHT for assistance.